AVX-10K Software Version 3.0.9 Available

0
417

New Features


• The AVI-10K now sets unit parameters to a fixed list of default settings when a
factory default is issued.
• Improvements made to the ILS / VOR Instrument:
o Added a Save/Recall function.
o Added the capability to operate in DDM when using the autopilot test.
o Added a “Revert to Normal” button to return any parameters to the normal (cal)
value if the operator changes any from the normal or default values.
o Added the ability for the user to create a guided test.


Improvements


• During UAT Target Generation, eliminated the requirement for password entry to
allow operators to access the real-time clock synchronization.
• Corrected an issue with loading predefined cables in VSWR/DTF instrument.
• Corrected an issue with inadvertent failures of certain OEM transponders.
• Corrected an issue where the ADS-B instrument recalls DO-260B test data and
formats as DO-260A data.
• Corrected an issue with ADS-B AUTO test data where all data is shown as PASS and
the overall test status shows as FAIL.
• Added temperature compensation for generator number 2.
• Corrected TCAS sensitivity and ERP measurements.
• Corrected Glideslope indication with an actual display in ILS mode.
• Corrected GICB register 1,7.
• Corrected modulation depth recalculation after a frequency or level change.
• Improved VOR tone control (button) to cycle thru OFF, TONE and MORSE.
• Improved scaling in transponder instrument for watts indication.
• Corrected test result for ELM in transponder autotest.


Calibration


• Re-calibration is not required for this software release.

Download Instructions


• The installation package is available via your StrataSync account or can be
downloaded by Clicking Here.